Stone Edge Surfaces Smooth Coat Mix is a just add water, Portland cement, very fine aggregate, proprietary additive, and heavy polymer enhanced concrete overlay mix that does not require a primer and allows 30 minute to 2-hours of working time for troweling, pumping, magic troweling or spraying.
Smooth Coat Mix is used in commercial or residential interior or exterior applications to achieve a Smooth (slurry) base or top coat and as a texture coat, broom finish, knockdown, skip trowel or other texture look.
Smooth Coat Mix is used in our Stone Edge Surfaces Deck and Balcony Waterproof System as the smooth and texture coat, and also as a stand alone product for varied applications.
Most applications…primer is not required.
MOST COMMON USES
-
Smooth / Slurry Coat
-
Knock Down Finish
-
Thin Coat Smooth Finish
-
Thin Coat Broom Finish
-
Base Coat / Stenciling
-
Top Coat Tape Down
-
Texture Coat
-
Base Coat for Overlays
-
Deck Waterproof System
-
Indoor or Outdoor Use
-
Pool Decks, Driveways & Patios
-
Walk Decks, Stairs, Roof Decks
APPLICATION
BASE/TOP COAT: Top Coat, Texture Coat, Base Coat, Slurry Smooth Coat, etc.
THICKNESS: Thin, 1/32” to 1/8” Max
APPLICATION METHOD: Pump, Trowel, Magic Trowel, Squeegee, Mortar Sprayer…No Primer Needed
WORKING TIME: Average 30 Minutes to 2-Hour (depending on application process, temperature, and thickness)
PRODUCTS USED WITH:
-
Liquid Colors & ColorPax
-
Stains & Sealers
-
Pro Bond • Deck Seal (14 colors)
-
Fiberglass Mat & Deck Resin
-
CPR-Concrete Patch and Repair
COMMONLY APPLIED OVER:
-
Deck Waterproofing System
-
Stable Substrates
-
Driveways & Walkways
-
Cementitious Base Coats
-
Concrete Floors
COVERAGE:
-
Smooth / Slurry Coat – (125-145 sqft)
-
Texture/Spray Coat (150-175 sqft)